Company Details
SHANDONG LE REN SPECIAL STEEL CO., LTD.
Unit Price: | 800~1100 USD |
---|---|
Min. Order: | 5 Metric Ton |
4140 scm440 42CrMo4 cold drawn Hexagonal Steel Bar
4140 scm440 42CrMo4 cold drawn hexagonal steel bar or Hex Steel Bar are produced by cold drawing from Hot Rolled Steel Round Bar through hexagonal mould. In general, before cold drawing, 4140 scm440 and scm 440 steel round bar will be annealed so that the steel bar is soft enough to protect both the mould and steel surface. Except cold drawn hexagonal steel bar, we can also supply 4140 scm440 42CrMo4 cold drawn and Q&T hexagonal steel bar to reach high strength for high strength usage.
4140 cold drawn steel bar we supply includes following advantages:
Consistent mechanical properties
Deep mechanical properties (from surface to the center according to your requirement)
Even hardness on the whole bars/Tougher and Increased strength
No brittle, UT testing/Precision size tolerance/Good straightness
Good Roughness/Professional technical service/Competitive price/Fast delivery
Specification of 4140 cold drawn steel bar we supply:
Sizes | Wide range from 14mm to 100mm |
Tolerances | Precision to h9, h10, h11 or even small to 0.02mm |
Roundness | 75% of diameter tolerance |
Straightness | Good straightness to 0.5mm/m |
Surface roughness | Smooth to 0.8um |
Mechanical properties | Yield strength and tensile strength can be improved |
Machining | Suitable for machining and welding |
1. 4140 steel equivalent material:
GB | ASTM/SAE/AISI | DIN | SCM | AS /NZS1444 |
42CrMo | Aisi 4140 / sae 4140 / astm 4140 | 42CrMo4 / 42CrMoS4 | SCM440 | AS 4140 |
2. 4140 steel chemical composition:
Materail | Chemical Composition % | ||||||
ASTM/SAE/AISI | C | Si | Mn | S | P | Cr | Mo |
Aisi 4140 / sae 4140 / astm 4140 | 0.38-0.43 | 0.15-0.35 | 0.75-1.00 | 0.035 max | 0.035 max | 0.80-1.10 | 0.15-0.25 |
3. 4140 steel mechanical properties:
Mechanical Properties | ||||
Yield Strength (MPa) | Tensile Strength (MPa) | Elongation | Reduction of area | AKV (J) |
930 min | 1080 min | 12% min | 45% min | 63 min |
high strength stud bolt, Threaded Rods, wind power bolt, prestressed anchor bolts, post stressed anchor bolt, Steel Tie Rod, tie bar, tension rod, Tension Bar etc. Shaft, axle shaft, crankshaft, shaft for sleeve, linear shaft, pump shaft, rotor shaft, sensor shaft, spline shaft, drive shaft, mandrel shaft, transmission shaft, screw rod etc. CNC machines, precision CNC machines etc. Ejector pins and Ejector rods
Product Categories : Cold Drawn Steel Bar > Hexagonal Steel Bar