Company Details
SHANDONG LE REN SPECIAL STEEL CO., LTD.
Unit Price: | 800~1100 USD |
---|---|
Min. Order: | 5 Metric Ton |
42CrMo4 cold drawn Hexagonal Steel Bar
42CrMo4 steel is a Chromium-Molybdenum through-hardening steel of medium hardenability. It is a general purpose high-tensile steel with medium strength level and good impact properties.
Cold finished steel is cold drawn or cold rolled by hot rolled steel. It is typically produced as turned bars or cold drawn bars. Cold Drawn Steel Bar is accomplished by cold drawing a bar through a mould. By cold drawing, the dimensional tolerances, the straightness and the surface roughness of the bars will be improved. In the meanwhile, the mechanical properties will be enhanced, too.
42CrMo4 cold drawn steel bar we supply includes following advantages:
Consistent mechanical properties
Deep mechanical properties (from surface to the center according to your requirement)
Even hardness on the whole bars/Tougher and Increased strength
No brittle, UT testing/Precision size tolerance/Good straightness
Good Roughness/Professional technical service/Competitive price/Fast delivery
Specification of 42CrMo4 cold drawn steel bar we supply:
Sizes | Wide range from 14mm to 100mm |
Tolerances | Precision to h9, h10, h11 or even small to 0.02mm |
Roundness | 75% of diameter tolerance |
Straightness | Good straightness to 0.5mm/m |
Surface roughness | Smooth to 0.8um |
Mechanical properties | Yield strength and tensile strength can be improved |
Machining | Suitable for machining and welding |
1. 42CrMo4 steel equivalent material:
GB | ASTM/SAE/AISI | DIN | SCM | AS /NZS1444 |
42CrMo | Aisi 4140 / sae 4140 / astm 4140 | 42CrMo4 / 42CrMoS4 | SCM440 | AS 4140 |
2. 42CrMo4 steel chemical composition:
Materail | Chemical Composition % | ||||||
ASTM/SAE/AISI | C | Si | Mn | S | P | Cr | Mo |
42CrMo4 | 0.38-0.43 | 0.15-0.35 | 0.75-1.00 | 0.035 max | 0.035 max | 0.80-1.10 | 0.15-0.25 |
3. 42CrMo4 steel mechanical properties:
Mechanical Properties | ||||
Yield Strength (MPa) | Tensile Strength (MPa) | Elongation | Reduction of area | AKV (J) |
930 min | 1080 min | 12% min | 45% min | 63 min |
high strength stud bolt, Threaded Rods, wind power bolt, prestressed anchor bolts, post stressed anchor bolt, Steel Tie Rod, tie bar, tension rod, Tension Bar etc. Shaft, axle shaft, crankshaft, shaft for sleeve, linear shaft, pump shaft, rotor shaft, sensor shaft, spline shaft, drive shaft, mandrel shaft, transmission shaft, screw rod etc. CNC machines, precision CNC machines etc. Ejector pins and Ejector rods
Product Categories : Cold Drawn Steel Bar > Hexagonal Steel Bar